四工位烫画机维护事项
3、时间,当底板到位时,不显示时间,则检查接近开关的距离是否适中。时间到达 发热板迟迟不下压,请检查电路。
4、温度,烫画机,调到设定的温度却不见升温,高压烫画机,不控温,则须检查温控表,固态继电器,以及发热板线路是否接触良好或电器原件是否故障。
Maintenance matters of working piostion
3. When the base plate is in place,气动烫画机, the time is not i displayed, and the distance of the proximity switch is checked. Time to reach the hot plate for slow pressure, please check the circuit.
Temperature, adjust to set temperature but not temperature,手动烫画机, do not conitrol temperature, then check temperature conitrol table, solid state relays, and whether the heating plate line is in contact with good or whether the original is faulty
液压烫画机
Hydraulic stamping machine
Features:
①Thermostat with digital screen to Handling temperature, whish is higny accurate(﹢2℃)
②Heating fuse installed inside the heating plate, safe and durabie with high temperature distributing enrnly
③A Iayer of fluorin pattned on the heating plate to prevent Congiutination
④Elections-Handling timer and finishing singnal
⑤Adjustable pressure
⑥Main board is made if silicagel, which can resist up to 350℃